IBM SAN32M-2, Инструкция по установке и обслуживанию

Страница: 89 / 312

63 Chapter 2: Installation tasks
Task 13: Record or verify server restore information
Windows operating system configuration information must be
recorded to restore the server in case of hard drive failure. Record or
verify the following information:
1. Verify network configuration information was recorded while
performing Task 6: Configure server password and network addresses
and Task 7: Configure management server information .
a. Verify the default LCD panel password ( 9999 ) or changed
password was recorded.
b. Verify default or changed network addresses were recorded
for the private LAN connection (LAN 2 ):
•
IP address -
default is
10.1.1.1
.
• Subnet mask - default is 255.0.0.0 .
• Gateway address - default is blank.
• DNS server IP address - default is blank.
c. Verify default or changed network addresses were recorded
for the public LAN connection ( LAN 1 ):
•
IP address -
default is
192.168.0.1
.
• Subnet mask - default is 255.0.0.0 .
•
Gateway address -
default is blank.
• DNS server IP address - default is blank.
d. Verify the default computer name (
MGMTSERVER
) or
changed computer name was recorded.
2. Verify user passwords and other information were recorded while
performing Task 8: Configure Windows operating system users .
3. Verify date and time information was recorded while performing
Task 9: Set management server date and time .
a. Verify the time zone was recorded.
b. Verify if the management server was set to automatically
adjust the clock for daylight savings time changes.