IBM SAN32M-2, Инструкция по установке и обслуживанию

Страница: 54 / 312

SAN32M-2 Installation and Service Manual 28
Configure product identification
Perform this procedure to configure the product identification. The
Name , Location , and Contact variables correspond respectively to the
SNMP variables sysName , sysLocation , and sysContact , and are used by
management workstations when obtaining product data.
1. Select Switch and Identification from the Configure menu at any
view. The Identification View displays ( Figure 11 ).
Figure 11
Identification View
a. Type a unique product name of 24 alphanumeric characters or
less in the Name field. If installed on a public LAN, the name
should reflect the product’s Ethernet network domain name
system (DNS) host name.
b. Type a product description of 255 alphanumeric characters or
less in the Description field.
c. Type the product’s physical location (255 alphanumeric
characters or less) in the Location field.
d. Type the name of a contact person (255 alphanumeric
characters or less) in the Contact field.
2. Click OK to save and activate changes.
Configure date and time
Perform this procedure to configure product date and time.
1. Select Switch and Date & Time from the Configure menu at any
view. The Date Time View displays ( Figure 12 ).
i24M1
13
2