IBM SAN32M-2, Инструкция по установке и обслуживанию

Страница: 91 / 312

65 Chapter 2: Installation tasks
3. Select the Element Manager option from the pop-up menu. When
the Element Manager application opens, the last view accessed by
a user opens by default. As an example, the
Hardware View
( Figure 31 ) is shown.
Figure 31 Hardware View
4. Inspect product status at the Hardware view and perform one of
the following steps:
• If the product appears operational (no CRU alert symbols and
a green circle at the status bar), go to Task 15: Configure PFE key
(optional) .
• If product operation appears degraded or a failure is indicated
(CRU alert symbols and a yellow triangle or red diamond on
the status bar), go to
MAP 0000: Start MAP to isolate the
problem.
i24M1
181