IBM SAN32M-2, Инструкция по установке и обслуживанию

Страница: 166 / 312

SAN32M-2 Installation and Service Manual 140
b. At the EFCM Basic Edition interface or SAN management
application, inspect names in the active zone set to determine
the incompatible zone name, then modify the name as directed
by the customer:
— EFCM Basic Edition - Refer to the EFCM Basic Edition
User Manual (620-000240) for instructions.
— SAN management application - Refer to the SANavigator
Software Release 4.2 User Manual (621-000013) or EFC
Manager Software Release 8.7 User Manual (620-000170)
for instructions.
Was the maintenance action successful?
NO YES
↓
The fabric, ISL, and product are operational. Exit MAP.
Contact the next level of support. Exit MAP.
11
An E_Port segmented because a build fabric protocol error was
detected.
a. Disconnect the fiber-optic jumper cable from the segmented
E_Port.
b. Reconnect the cable to the same port.
Was the maintenance action successful?
NO YES
↓
The fabric, ISL, and product are operational. Exit MAP.
12
Reset the product. Refer to IML or reset switch for instructions.
Was the maintenance action successful?
NO YES
↓
The fabric, ISL, and product are operational. Exit MAP.
Perform a data collection and contact the next level of support. Refer
to Collect maintenance data (EFCM Basic Edition) or Collect
maintenance data (Element Manager). Exit MAP.