IBM SAN32M-2, Инструкция по установке и обслуживанию

Страница: 95 / 312

69 Chapter 2: Installation tasks
Figure 33
Configure FICON Management Server dialog box
a. At the Director Clock Alert Mode field, check (enable) or
uncheck (disable) the parameter. When enabled, a warning
message appears if the product is set to periodically
synchronize date and time with the management server. This
process may conflict with the date and time set from the
attached FICON host.
b. At the Host Control Prohibited field, check (enable) or uncheck
(disable) the parameter. When enabled, this option prohibits
FICON host control of the product.
c. At the Programmed offline state control field, check (enable) or
uncheck (disable) the parameter. When enabled, this option
allows an attached FICON host to set the product online or
offline.
d. Select from the Missing Interrupt Handler Timeout (MIHPTO)
drop-down list to select a value. Available selections range
from 15 seconds to 10 minutes. The MIHPTO value is the
response time a host allows from a product before timing out
the FICON link. Large fabrics require a large value.
e. Click Activate to enable changes and close the dialog box.
4. Click Zoning . The Configure FICON Management Server Zoning
dialog box displays ( Figure 34 ).
i24M1
185