IBM SAN32M-2, Инструкция по установке и обслуживанию

Страница: 219 / 312

193 Chapter 4: Repair information
a message displays indicating the problem must be fixed before
the firmware download. Conditions that terminate the process
include:
— A firmware version is being installed to by another user.
— The switch-to-management server link failed or timed out.
If a problem occurs and a corresponding message displays, go to
MAP 0000: Start MAP to isolate the problem. If no error occurs, a
Warning dialog box displays confirming the operation.
5. Click Yes to download the firmware version. The Send Firmware
dialog box displays and the following occur during the download
process:
a. As the download begins, a Writing data to FLASH message
displays at the top of the dialog box.
b. As the download progresses, a Sending Files message
displays and remains as a progress bar shows percent
completion of the download. The bar progresses to 100% when
the last file is transmitted to the CTP card.
c. As the download finishes, a Writing data to FLASH message
displays again.
d. The switch performs an IPL, during which an IPLing message
displays at the Send Firmware dialog box. In addition, the
switch-to-management server Ethernet link drops
momentarily.
6. After the IPL, a Send firmware complete message displays at the
Send Firmware dialog box. Click Close to close the dialog box.
7. Click Close to close the Firmware Library dialog box.
Manage configuration data
The Element Manager application provides options to:
• Back up and restore the configuration file stored in NV-RAM on
the switch CTP card.
• Reset the configuration file to factory default values.
The switch must be set offline prior to restoring or resetting the
configuration file.