IAI PSEL, Руководство по эксплуатации

Страница: 924 / 1062

[20] Arch-Motion
430
z
ATRG (Set arch triggers)
Command, declaration Extension
condition
(LD, A, O, AB, OB)
Input condition
(I/O, flag)
Command,
declaration
Operand 1 Operand 2
Output
(Output, flag)
E N, Cnd Cmnd Operand 1 Operand 2 Pst
Optional Optional ATRG
Position
number
Position
number
CP
Applicable models
All models [Refer to Section 5.1 for details of models]
{
Set the arch triggers used for arch motion.
(This setting becomes valid when an ARCH command is executed.)
Set the arch-motion Z-axis position data in the point data specified in operand 1 as the
start-point arch trigger, and set the arch-motion Z-axis position data in the point data specified
in operand 2 as the end-point arch trigger.
ATRG 13 11
(Refer to “Palletizing Setting” – “Arch triggers” under “How to Use”.)
For an arch-motion operation, set it so that a horizontal movement will begin when the
start-point arch trigger is reached during ascent from the start point, and that the end-point
arch trigger will be reached after a horizontal movement is completed during descent.
If the output field is specified, the output will turn ON after this command is executed.
Start-point arch trigger
Position No. 13
End-point arch trigger
Position No. 11
Start point
End point