Hyundai HI RUN n 700, Инструкция по эксплуатации, Страница: 107 / 186

N700 Operating Instructions and Parts Manual 9. Explanation of I-Group Function
86
code
Function
name
Code
value
Contents Item
13 USP Unattended start protection
Unattended start protection
function
15 SFT Software lock(control terminal) Software lock
16 AT Analog input voltage/current select Analog external input
17 RESET Reset inverter Reset inverter
18 STA 3wire start
19 STP 3wire stop
20 F/R 3wire direction(forward/reverse)
3wire input function
21 PID PID selection (valid/invalid)
22 PIDC PID integrating reset
PID function
24 UP Remote control UP function
25 DOWN Remote control DOWN function
26 UDC Remote control data clear
Remote control UP/DOWN
function
27 OPE Force operation start Force operation starting function
29 TL Torque restriction presence
30 TRQ1 Torque limit switching 1
31 TRQ2 Torque limit switching 2
Torque limit function
33 BOK Brake confirmation Brake control function
34 ORT Orientation
35 LAC LAD cancel
36 PCLR Position deviation clear
37 STAT Pulse train input permission
Option function (Refer to
feedback function)
38 XT1
Multi-step
acceleration/deceleration time 1
39 XT2
Multi-step
acceleration/deceleration time 2
40 XT3
Multi-step
acceleration/deceleration time 3
Multi-step
acceleration/deceleration Time
function
Table 9- 2 Input terminal function selection (I001~I008)
(4) The initial function setting(I001~I008) for the intelligent input terminal is like the following :
Code Function name Initial value Unit Set range Contents
I001 Intelligent 1 Input 17 - 0~40 Initial value is setting by 17 (RESET)
I002 Intelligent 2 Input 16 - 0~40 Initial value is setting by 16(AT)
I003 Intelligent 3 Input 6 - 0~40 Initial value is setting by 6(JOG)
I004 Intelligent 4 Input 11 - 0~40 Initial value is setting by 11(FRS)
I005 Intelligent 5 Input 9 - 0~40 Initial value is setting by 9(2CH)
I006 Intelligent 6 Input 3 - 0~40 Initial value is setting by 3(CF2)
I007 Intelligent 7 Input 2 - 0~40 Initial value is setting by 2(CF1)
I008 Intelligent 8 Input 1 - 0~40 Initial value is setting by 1(REV)
Table 9- 3 The initial function setting(I001~I008) for the intelligent input terminal
Like the following example, each function needed to be set has to be assigned to I001~I008
code directly.
The initial setting value is as following: