Husqvarna te-smr 570/2004, Руководство по ремонту

Страница: 60 / 384

C.8
N° 8000A2943 (09-03)
TROUBLES AND REMEDIES
FRAME, WHEELS AND SUSPENSION
Trouble Cause Remedy
Difficult to turn handlebars 1. Low tyre pressure Inflate
2. Steering head bearings' adjustment ring or steering stem nut
too tight Adjust
3. Bent steering head pillar Replace
4. Stearing head bearings worn or seized Replace
Handlebar vibrates 1. Front fork legs bent Replace
2. Front wheel spindle bent Replace
3. Frame bent Replace
4. Front wheel rim buckled Replace
5. Front wheel bearings worn Replace
Suspension too hard 1. Too much oil in front fork stanchions Drain excess
2. Front fork stanchion oil of too high a viscosity Replace
3. Inflating pressure too high Deflate
4. Rear shock absorber incorrectly set Adjust
Suspension too soft 1. Insufficient oil in front fork stanchions Top up
2. Front fork stanchion oil of too low a viscosity Replace
3. Weak front fork spring Replace
4. Weak rear shock absorber spring Replace
5. Rear shock absorber badly adjusted Adjust
Wheel (front and rear) 1. Wheel rim buckled Replace
vibrates 2. Wheel hub bearings worn Replace
3. Wheel spokes loose Tighten
4. Wheel spindle nut loose Tighten
5. Rear swinging arm bearings worn Replace
6. Chain tensioner incorrectly set Adjust
7. Wheel not balanced correctly Balance
Rear suspension noisy 1. Link rod bearings or spacers worn Replace
2. Shock absorber ball joints worn Replace
3. Shock absorber faulty Replace
Poor (front and rear) 1. Air in the brake sustem Bleed
braking 2. Insufficient fluid in reservoir Top up
3. Pads and/or disc worn Replace
4. Disc damaged Replace
5. Brake pedal incorrectly adjusted Adjust
6. Water inside the braking system. Replace the fluid
Man 570-2004-IMP. C 24-09-2003 11:20 Pagina C.8