HP StoreAll 8200 Скачать руководство пользователя страница 140

Страница: 140 / 252

Complete the following fields.

Description

Field

Selecting this option enables Audit log on the file system.
Express Query must also be enabled.

Enable Auditing

Select this option to specify the time for cleaning up old
audit reports. This task is performed automatically each
day.

Audit Log Reports Expiration Schedule

Select this option to specify the expiration period for the
audit log reports.

Audit Log Reports Expiration Policy

Select this option to specify the expiration period for the
audit logs.

Audit Logs Expiration Policy

Select this option to specify the audit events to be
enabled or disabled. Select an event category to enable
all events in that category.

Disabled Events and Enabled Events

The following table lists the auditing events by category. To enable an event, select it and use
the arrows on the screen to move it to the

Enabled Events

pane. To disable an event, move it

to (or leave it) in the

Disabled Events

pane.

Events for each category

Event category

directory_deleted

file_deleted

file_deleted_admin

file_modified

Access

140 Discovering and configuring HP StoreAll servers and their storage

Содержание StoreAll 8200





























































































































































































































































Результаты поиска

Содержание StoreAll 8200

Отзывы:

HP StoreAll 8200, Руководство по установке, Страница: 140 / 252

Результаты поиска

Содержание StoreAll 8200

Отзывы: