HP StoreAll 8200 Скачать руководство пользователя страница 113

Страница: 113 / 252

Step 5 - Reviewing the Summary

In the

Summary

screen, review the configuration changes that you made. If necessary, you

can go back to previous screens to make any further changes.

The

Summary

screen also displays any warnings or other items that may require further

investigation after you complete the wizard. Click the applicable item for more information.

IMPORTANT:

Review any listed warnings or other items noted during the post-installation

checks on the

Summary

screen, and then click the items to determine whether further action

is needed.

To view logs, check firmware, or perform health checks, select the appropriate option to view
more information.

Click

View Log

to display the installation log. The wizard saves an installation log at

/usr/

local/ibrix/log/installtime.log

on the server where you ran the wizard.

Step 5 - Reviewing the Summary

113

Содержание StoreAll 8200





























































































































































































































































Результаты поиска

Содержание StoreAll 8200

Отзывы:

HP StoreAll 8200, Руководство по установке, Страница: 113 / 252

Результаты поиска

Содержание StoreAll 8200

Отзывы: