HP StorageWorks X9720, Руководство администратора

Страница: 93 / 187

2. Start the FTP service:
# service vsftpd start
3. Download the HP 3Gb SAS BL Switch Firmware from the HP Support website or install the
mxso-firmware
file onto the Management Server.
4. Copy the firmware file to the
/var/ftp/pub
directory. For example:
# cp /opt/hp/mxso/firmware/S-2_3_2_13.img /var/ftp/pub
5.
ssh
to the OA using the
exds
user:
# ssh 172.16.1.1 —l exds
6. Connect to the switch module in the bay being upgraded (bay 3 or 4):
x123s-ExDS-OA1> connect interconnect <bay number>
7. Log in with the same credentials as the OA.
8. Flash the new firmware. For example:
=> sw local flash file=ftp://172.16.3.1/pub/S-2_3_2_13.img
9. While still logged in to the interconnect, run the
reset
command.
=> sw local reset hard
continue (y/n)? y
10. While the switch is rebooting, verify that the VSM version number has been updated.
11. Disconnect from the interconnect by pressing
Ctrl-Shift-_ (Control, Shift, and underscore keys)
and then enter
D
for "D)isconnect".
12. Repeat the process if you are upgrading the other bay.
13. Exit from the OA using
exit
.
14. At the Management Server prompt, run the
exds_stdiag
command to validate that all
switches are the same and at the correct minimum revision. The output contains text such as:
switch HP.3G.SAS.BL.SWH in 4A fw 2.76
switch HP.3G.SAS.BL.SWH in 3A fw 2.76
switch HP.3G.SAS.BL.SWH in 4B fw 2.76
switch HP.3G.SAS.BL.SWH in 3B fw 2.76
If the firmware version is incorrect, the
exds_stdiag
command prints a * character at the
beginning of the line.
15. Stop the FTP service:
# service vsftpd stop
16. Log off the Management Server.
Upgrading SAS switch module firmware 93