HP StorageWorks X9720, Руководство администратора

Страница: 112 / 187

MAC Address Type=Factory-Default
WWN Address Type=Factory-Default
Synchronizing information on file serving nodes and the configuration
database
To maintain access to a file system, file serving nodes must have current information about the file
system. HP recommends that you execute
ibrix_health
on a regular basis to monitor the health
of this information. If the information becomes outdated on a file serving node, execute
ibrix_dbck
-o
to resynchronize the server’s information with the configuration database. For information on
ibrix_health
, see “Monitoring cluster health” (page 51) .
NOTE: The
ibrix_dbck
command should be used only under the direction of HP Support.
To run a health check on a file serving node, use the following command:
<installdirectory>/bin/ibrix_health -i -h HOSTLIST
If the last line of the output reports
Passed
, the file system information on the file serving node
and management console is consistent.
To repair file serving node information, use the following command:
<installdirectory>/bin/ibrix_dbck -o -f FSNAME [-h HOSTLIST]
To repair information on all file serving nodes, omit the
-h HOSTLIST
argument.
112 Troubleshooting