manualshive.com logo in svg

HP Spooler FASTP, Руководство пользователя, Страница: 248 / 368

Поделиться
Скачать
HP Spooler FASTP Скачать руководство пользователя страница 248

EMS Messages

Spooler FASTP Network Print Processes Manual — 427528-006

B - 36

FASTPTCP Event Messages

61

proc-name

is the process name of the FASTPTCP process.

device-name

is the Spooler device name.

Cause. 

The FASTPTCP process could not find a device record for the specified 

device in a FASTKCON or FASTCNFG file. This message is accompanied by message 
number 60.

Effect. 

No printing occurs, the Spooler job is requeued, and the Spooler device is 

placed offline.

Recovery. 

Add the device record to FASTCNFG as described in 

FASTCNFG 

DEVICE, HOSTS, and POLLTYPE Configuration for FASTPTCP

 on page 3-13. If 

necessary, run FASTKCUT to generate the FASTKCON file, and restart the Spooler 
device. (Depending on the device configuration, the device might restart automatically.)

62

proc-name

is the process name of the FASTPTCP process.

device-name

is the Spooler device name.

Cause. 

FASTCNFG or FASTKCON was changed while a FASTPTCP process was 

active, and the print process had already printed one or more jobs for the device and 
had started another print job.

Effect. 

No printing occurs, the Spooler job is requeued, and the Spooler device is 

placed offline with error 66.

Recovery. 

Restart the Spooler device. (Depending on the device configuration, the 

device might restart automatically.)

proc-name

 DEV: 

device-name

 not defined in FASTKCON/FASTCNFG

proc-name

 DEV: 

device-name

 FASTKCON/FASTCNFG has changed, 

resetting device

Содержание Spooler FASTP

















































































































































































































































































































































































Отзывы:

Нет отзывов