manualshive.com logo in svg

HP Spooler FASTP, Руководство пользователя, Страница: 195 / 368

Поделиться
Скачать
HP Spooler FASTP Скачать руководство пользователя страница 195

Installation, Configuration, and Usage 
Considerations for FASTPXNS

Spooler FASTP Network Print Processes Manual — 427528-006

7 - 21

CONTROL, CONTROLBUF, and SETMODE 

Considerations for Xerox Printers

CONTROL, CONTROLBUF, and SETMODE 
Considerations for Xerox Printers

The CONTROL, CONTROLBUF, and SETMODE considerations for Xerox 4050 
printers are the same as those described in 

Using the CONTROL, CONTROLBUF, and 

SETMODE Operations

 on page 2-27 with the following exceptions:

CONTROLBUF Operations

CONTROLBUF operations are used to perform device-dependent I/O operations. The 
following CONTROLBUF operation values have special meanings for FASTPXPNS: 

CONTROLBUF 100 — Alternative Start Print Command 

CONTROLBUF 100 is used to enable FASTPXNS to send an alternative Start Print 
command to Xerox 4050 printers. See 

Xerox Start Print Command Considerations

 on 

page 7-19 for more information.

CONTROLBUF 112 — Special Header Pages

CONTROLBUF 112 is used to supply a printing mask to FASTPXNS. This mask can 
contain tokens, which FASTPXNS replaces with its own generated text items, and 
strings of text to be printed by FASTPXNS. Typically one or more of these 
CONTROLBUF 112 mask calls can be embedded in a FONT job in order to create 
special header pages.

Text for printing by FASTPXNS is supplied as text within the CONTROLBUF buffer.

Tokens for translation by FASTPXNS are supplied as special two-byte sequences in 
the CONTROLBUF buffer. The first byte must be decimal 255 (all bits on). This is 
recognized by FASTPXNS as indicating that the next byte contains a token which must 
be substituted. 

Table 7-5

 lists the CONTROLBUF 112 token values (in decimal 

notation) that are recognized by FASTPXNS:

Note. 

To ensure that a consistent date and time is emitted, tokens 226, 227, 228, 229, 230, 

231, 232, 233, 234, and 235 should be contained in a single CONTROLBUF call.

Table 7-5.  Token Values for FASTPXNS CONTROLBUF 112 

(page 1 of 2)

Token Value

Action

226 

Emit the current second as SS.

227 

Emit the current minute as MM.

228 

Emit the current hour as HH.

229 

Emit the current day as 1st, 2nd, and so on.

230 

Emit the current day as DD.

231 

Emit the current month as text.

Содержание Spooler FASTP

















































































































































































































































































































































































Отзывы:

Нет отзывов