manualshive.com logo in svg

HP Spooler FASTP, Руководство пользователя, Страница: 153 / 368

Поделиться
Скачать
HP Spooler FASTP Скачать руководство пользователя страница 153

Installation, Configuration, and Usage 
Considerations for FASTPNOV

Spooler FASTP Network Print Processes Manual — 427528-006

5 - 13

NetWare LAN Considerations

NetWare LAN Considerations

The following LAN-related information should be considered when configuring the 
FASTPNOV print process.

User ID and Password

The user ID (USERID attribute) and password (PASSWORD attribute) defined in a 
DEVICE entry in the FASTCNFG configuration file for a NetWare print queue must also 
be defined for the corresponding NetWare print server. 

Job Identification

A NetWare print job has a job description associated with it. This description can be 
used to identify different print jobs sent to the same print queue by the same user. The 
job description consists of 50 characters divided among the following fields and offsets.

SYSTEM field (8 characters) 

is the system name for the HP NonStop system where the FASTPNOV print 
process is located. The first character of a system name is a backslash (\). If the 
system name consists of fewer than 8 characters, the remaining characters in the 
field are blank. An example of a system name is:

\FINSYS

 JOB# field (9 characters) 

is the Spooler job number or batch job number assigned to the job by the 
FASTPNOV print process. The job number field consists of the following 
components:

A blank character

A “J” to denote an individual job or a “B” to denote a batch job 

A 6-digit, blank-filled job number

A blank character

An example of a job number is:

J   357

OWNER field (17 characters) 

is the owner name assigned to the job by the FASTPNOV print process. The owner 
name is derived from the logon ID of the person submitting the job. If the owner 
name consists of fewer than 17 characters, the remaining characters in the field 
are blank. An example of an owner name is:

FINANCE.BOB

Содержание Spooler FASTP

















































































































































































































































































































































































Отзывы:

Нет отзывов