horsch LEEB PT 330, Руководство по эксплуатации

Страница: 89 / 203

NOTE
If the engine does not start within 20 seconds,
wait at least two minutes before starting the
next attempt.
Option 2 - Control panel
¾
Turn the ignition key to position (2), so that
the electric circuit is switched on.
¾
Press the operating brake and hold until the
engine is running.
¾
Press the start button (a) on the multi-function
control panel, until the engine runs.
¾
Pressing the operating brake and pushing
the start button can then be dispensed with.
a
NOTE
If the engine does not start within 20 seconds,
wait at least two minutes before starting the
next attempt.
6.3 Shutting the engine
down
The engine can be shut down in two different ways.
Option 1 - Ignition key
¾
Turn the ignition key to position (3)
Option 2 - Control panel
¾
Press the stop button (b) on the multi-function
control panel
b
NOTE
The following applies in any case: Before
finally parking the machine allow the engine to
run 1 - 2 minutes at low speed range, so that all
important engine parts can cool down.
6.3.1 Stalling the engine
NOTE
In order to avoid excessive heat accumulation
on parts with utmost importance for the function
of the engine, an unexpectedly stalled engine
must be restarted immediately. Before finally
shutting the engine down run it for approx. 1 - 2
minutes with low speed.
Each time the engine stops the hand brake is
automatically applied!
Notes on engine maintenance, see chapter
"Maintenance of carrier vehicle"
89