horsch LEEB PT 330, Руководство по эксплуатации

Страница: 77 / 203

5
6
Air nozzles in steering column (5) and consoles (6)
7
8
Air nozzles in the dashboard area (7) and in the cabin (8)
Adjust the ventilation as follows to dry the
screens:
¾
Set the button (2) to position (III)
¾
Close the air nozzles (5) and (6)
¾
If necessary set air quantity and temperature
For a uniform temperature in the complete cabin
adjust the ventilation as follows:
¾
Set the button (2) to position (III)
¾
Open the air nozzles (5) and (6)
¾
Align the air nozzles (5) and (6) manually as
desired
Adjust the ventilation as follows to optimize the
warm air supply in the foot area:
¾
Set the button (2) to position (I)
¾
Close the air nozzles (5)
¾
Open the air nozzles (6)
¾
Set fan power and temperature as required
4.13.4 Outside temperature
display
1
2
The outside temperature is measured by a sen-
sor. The value detected by this sensor is also
used by the automatic control of the air condi-
tioning system
¾
Press the button (1) for a short moment (jog)
to show the outside temperature in the display
of control panel (2).
No display of other information in the control
panel will not be changed. Touching the button
(1) or any other button related to the air con-
ditioning system again causes the displayed
outside temperature to disappear.
4.13.5 Air circulation in the cabin
1
2
¾
Press button (1) to activate, change or deac-
tivate air circulation in the cabin.
Each actuation of the button (1) increases the
circulation by 25%. If the air circulation is set to
100%, the air circulation can be deactivated by
pressing (1) again. The displayed symbols (2)
change with each actuation of the button.
77