Honeywell Vocollect, Справочник по аппаратуре

Страница: 69 / 316

| Talkman A700 | 69
Note: The beep that signals a scan is enabled by default but can be disabled by setting
EnableBeepOnBarcodeScan to 0. The beep volume is controlled by the device volume and can be adjusted
with the Plus (+) and Minus (-) buttons on the device.
About LED Indicators
Vocollect Talkman devices, SRX and SRX2 headsets, and their chargers have LEDs that indicate the state of the
equipment. These LEDs may be on, off or blink. In some cases an LED will blink, alternating between two colors.
If the LEDs indicate that there is a problem, refer to information on troubleshooting to solve the problem. See also
Troubleshooting Problems Indicated by LED .
A700 Device LED Indicators
The Talkman A700 products have several LED indicators to inform you of different states. The indicators and their
blinking patterns are described in the following sections:
Device State Indicator
The device state indicator is a ring that is divided into a larger and smaller segment:
Figure 11: Ring Segments on Device State Indicator
Color Blink Pattern Device State
Off Off Off
Green Small segment pulse Sleep
Green Small segment on On
Green Solid ring Charging complete
Green Fast blink Touch Config or TouchConnect
successful
Yellow Rotating ring Loading or changing operator
Yellow Rotating ring Loading or changing task
Yellow Rotating ring Loading or changing voice
Yellow Rotating ring Starting up
Yellow Solid ring Charging
Yellow Small segment pulse Platform is loaded, but no task
loaded
Yellow Small segment on TouchConfig sender mode entered