Honeywell Vocollect, Справочник по аппаратуре

Страница: 95 / 316

| Talkman A500 | 95
Cable Input Connector
Black (may differ depending on the cable) – Vehicle
Negative
-
Green - Vehicle Ground:
Follow equipment manufacturer’s recommendations
for connecting the case ground terminal of the power
supply.
GND
• Tighten the screws.
• Ensure the cables are secure
7. Once all of the cables have been successfully installed, attach cable ties to secure the cables.
Figure 38: Cables Attached to the Power Supply
8.
Place the power supply in a place out of the way, such as under the dashboard of a fork lift, and attach it to a
secure surface with cable ties. Alternatively the power supply could be secured by bolting it using the mounting
slots.
Figure 39: Power Supply Attached to a Secure Surface on the Vehicle
9.
Run the cable that connects the battery adapter to the power supply from the power supply to the location where
the A500/T5 VMT will be mounted
10. Connect the yellow wire to the battery adapter by attaching the connector and tightening the nut.
Connecting the A700/T5 VMT Device to a Vehicle's Power Source
You will need the following equipment:
• Two fuse holders from Cooper Bussman. Honeywell recommends using a Cooper Bussmann HFA series in line
waterproof fuse.
• Two fuses. Honeywell recommends a 4A 250V SLO BLO
™
fuse.
• Three spade connectors