Honeywell Vocollect, Справочник по аппаратуре

Страница: 280 / 316

| Template Training Options | 280
2. Connect the training device to your Talkman device.
3.
Turn your Talkman device on by pressing the Play/Pause button.
The LED indicator turns red for a few moments then turns green. The training device displays, "Please keep quiet
for a few seconds."
Note:
• If your device does not say this, press the Operator button to manually perform a background noise
sample.
• If you cannot see words displayed on the training device screen, there may be a problem with the
contrast on the device. Refer to the manufacturer's documentation.
The Talkman device says and the training device displays, "Please say zero."
4. Say "Zero."
The Talkman device says and the training device displays, "One."
5. Say "One."
The Talkman device says and the training device displays, "Two."
6. Say "Two."
The Talkman device says, "Please say the following words as they appear on the screen."
The Talkman device stops speaking and words to train are only displayed on the screen. Speak the words as they
appear on the device display. Words appear in random order and are repeated at least four times to get an accurate
recording of how you speak the words. If it prompts you for phrases, say the phrase naturally, without exaggerated
pauses between the words.
When the device has asked for all words in the task the necessary number of times, the device will say, "Creating
voice templates. Please wait." It will then beep periodically until all of the remaining voice templates have been
created.
During the beeping, the device periodically repeats the "... Please wait" phrase to alert the user that it is still busy.
When the remaining voice templates have been created, the device says, "Finished creating voice templates." The
device then goes to sleep. You can begin the task by pressing the Play/Pause button.
You can expect the device to beep for approximately two minutes after all of the vocabulary words have been spoken.
If the operator presses any of the device's buttons during this time period, the device says, "Creating voice templates.
Please wait."
Disconnect the training device and begin your task by pressing the Play/Pause button.
Training through VoiceConsole's Display
Note: Supported when using VoiceConsole 3.0 or newer with VoiceClient 3.5 and newer and VoiceCatalyst
MP 1.0 and newer.
You can view the words the device asks you to train on a computer screen, through the user interface, or pocket PC
device screen as you go through the training process. See Viewing Dialog Between a Device and an Operator in the
VoiceConsole online help for more information.
Training Using a Printed List of Words
If you suspect operators may have a difficult time recognizing the words the device is speaking during training, you
can create a print out of the words used in the task that the device will ask the operators to train.
Note: This method is supported when using VoiceConsole 3.1 or newer.
Note: This is the recommended training method for the Talkman T1.