Honeywell Vocollect, Справочник по аппаратуре

Страница: 123 / 316

| Talkman T5 Series | 123
Figure 79: Cables secured on a vehicle
The cable end that connects to the battery adapter should have enough length to permit easy disconnection and
docking of the battery adapter but not so much length that it could become snagged on something.
The cable may be secured to the bottom of the adapter using the two holes on the bottom of the docking area of
the adapter. If the cable is secured in this manner, use spiral cable wrap, supplied with the VMT Talkman adapter,
to provide additional protection.
Figure 80: Cables secured on a vehicle
To accomplish this mounting:
• Place approximately 2.50 inches of spiral wrap (0.25-inch outer diameter) on the yellow cable with its
midpoint at 9 or 10 inches from the cable end connector.
• Using a cable tie (maximum 0.1 inch wide), attach the wrapped section of the cable to the RAM cradle using
the holes on the bottom of the adapter docking area as shown.
Cabling inside of the vehicle to the battery adapter should also be secured and maintained neatly to prevent cable
travel and accidental damage or shorting. Cables should be kept clear of any articulating members. The full range
of articulation should be exercised to ensure that any vehicular operation will not physically compromise the
cables.
Accessories
Honeywell offers a variety of accessories for wearing, protecting, and facilitating the operations of Talkman and other
devices.
Handheld and other devices may require specific cables in order to use Honeywell accessories, such as headsets. See
the release notes for the Vocollect Voice software for your device for more information.