Honeywell Vocollect, Справочник по аппаратуре

Страница: 173 / 316

| Honeywell Wireless Headsets | 173
Headset Functions and LED Patterns for SRX
Headset Function User Action Headset Mode LED Pattern Tone
Power On Hold the Plus (+) and
Minus (-) buttons for
one second
Headset powers on
and searches for the
previously-connected
device. No new
pairing takes place.
Quick flutter Two high-pitched
tones
Power Off Hold Plus (+) and
Minus (-) buttons for
three seconds when
headset is powered
on
Headset is powered
off and cannot be
used to perform work
Solid blue, then turns
off.
Important:
Do not
remove the
battery until
the LED is
off.
Two low-pitched
tones
Increase volume Press the Plus (+)
button
N/A N/A Current audio gets
louder
Decrease volume Press the Minus (-)
button
N/A N/A Current audio gets
softer
Force disconnect for
manual pairing in
low power mode
Hold the Plus (+) and
Minus (-) buttons for
four seconds
Headset disconnects
current pairing and
enters low power
pairing mode
Headset attempts to
pair with the nearest
un-paired Bluetooth
device. Previous
pairing erased from
headset's memory.
Constant quick flash:
four flashes per
second (50 ms on,
200 ms off)
No tone when
entering mode. Three
ascending tones upon
pairing with a device
Switch to high power
pairing when pairing
in low power mode
has failed
With headset in
pairing mode, hold
the Plus (+) and
Minus (-) buttons for
seven seconds
Headset enters high
power pairing mode
Headset attempts to
pair with the nearest
un-paired Bluetooth
device. Previous
pairing erased from
headset's memory.
Note: This
mode is
recommended
when pairing
an SRX
headset with
a handheld
device
Note:
Honeywell
does not
Constant flash in
which LED stays lit
longer: about two
flashes per second
(350 ms on, 50 ms
off)
No tone when
entering mode. Three
ascending tones upon
pairing with a device