Honeywell Vocollect, Справочник по аппаратуре

Страница: 248 / 316

| Adapter Cables and Listening Kits | 248
Wired Listening Kits
CAUTION: Honeywell strongly recommends the use of only approved listening systems sold by Honeywell.
If you choose to use a listening system that is not approved by Honeywell, Honeywell requires that the
listening system is independently powered through its own source (such as a battery) and has an input
impedance greater than or equal to 2K ohms. Honeywell is not responsible for equipment damage that may be
caused by listening systems not sold by Honeywell.
Figure 175: Radio Shack Wired Listening Kit
Figure 176: Marshall Demonstration Wired Listening Kit
• The wired listening kit connects to Talkman devices or handheld devices and allows a number of people, such as
trainers or supervisors, to listen to the conversation between an operator and a Talkman device or handheld device.
• The Vocollect audio adapter cable with the red connector can be used with Talkman devices.
• A device-specific adapter training cable (also referred to as a "Y" or splitter cable) must be used with third-party
handheld devices.
• For more information, consult the user manual provided with your listening kit.
Monitoring Audio on a Talkman Device
1. Connect the 3.5 mm jack on the inline adapter training cable to the input jack on your listening system.
2. Connect the other end of the training cable to the matching port on the Talkman device.
Important: For wired listening configurations, ensure that you are using the correct cable and port for
your device.
Talkman Device Cable Port
Talkman A500 or Talkman T-
Series
Audio splitter cable (TR-603-
xxx)
Red port
Talkman A500 or T-Series with
visual training device on the red
port
Headset training cable
(AD-300-1)
Yellow port