Honeywell Vocollect, Справочник по аппаратуре

Страница: 250 / 316

| Adapter Cables and Listening Kits | 250
transmitting radio to a different channel and then changing the channel on the receiving radio to that of the
transmitter you wish to monitor.
Using the Samson Wireless Listening System
For best performance, attach listening devices to the red port of your Talkman device. If the red port is unavailable,
or if you are using a handheld device, an inline adapter training cable, or "Y" cable, attached to the yellow port may
be used. When using the "Y" cable, be sure to connect both a Vocollect headset and the listening system transmitter
because the headset's performance is influenced by gain and headphones level adjustments.
You need the following items:
• Samson listening kits (TR-605-x) with both radios configured to the same channel setting. Each listening system
contains the following items:
• Receiver
• Transmitter
• Plastic screwdriver
• Headphones with 3.5 mm jack
• Batteries (2 9V for TR-605-x)
• Vocollect audio adapter cable
• If you are using a Talkman A500/T5 with a wired barcode reader, you will need the TR-603-102 "Y" adapter cable
which connects a scanner and a listening kit transmitter via the red port on the A500/T5 device.
• If you are using a handheld device, you will need the AD-300-1 inline "Y" adapter training cable which provides a
connection for a wired Vocollect headset and an audio output connection to go to the listening kit transmitter.
• Talkman device or handheld device
• Vocollect SR-Series headset
Setting up the Transmitting Radio
Figure 178: Transmitting Radio TR-605-x
The transmitting radio is set up as a dedicated transmitter and is connected to the operator's Talkman device or
handheld device.
1. Insert a battery into the transmitting radio. (TR-605-x transmitters are labeled UHF BELTPACK TRANSMITTER
on the bottom front)
2. Connect the Honeywell audio adapter cable to the appropriate port on the operator's Talkman device or handheld
device.
• For a Talkman A710 or A730, connect the Micro USB cable to the maintenance port on the Talkman device.
• For a Talkman A720, A500,or T5 Series, connect the audio adapter cable to the red port on the Talkman
device.
• For a handheld device, use the correct audio adapter training cable for your device.