Honeywell Vocollect, Справочник по аппаратуре

Страница: 42 / 316

| Talkman A700 | 42
Registry Key Default Value Description
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Code 93] - Code 93 Symbology Configuration
Code93Activation 0x0 Enables the Code 93 symbology.
Code93CodeMark 0x44 A single character inserted before the barcode data to
indicate the symbology.
Code93BarCodeLengthL1 0x1 Length value L1. Range is 0x0 to 0xFF (0 to 255).
Code93BarCodeLengthL2 0x0 Length value L2. Range is 0x0 to 0xFF (0 to 255).
Code93BarCodeLengthL3 0x0 Length value L3. Range is 0x0 to 0xFF (0 to 255).
Code93BarCodeLengthMode 0x0 Length verification mode, where 0 = "L1 is min length", 1
= "L1, L2, L3 are fixed lengths", and 2 = "L1 is min, L2 is
max length".
Code93UDSI "B6" User-defined symbology identifier. Range is 0-4 characters.
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Code 39] - Code 39 Symbology Configuration
Code39Activation 0x1 Enables the Code 39 symbology.
Code39Unconventional 0x0 Allows decoding of unconventional Code 39 (large
intercharacter spacing or a large ratio between narrow and
wide elements).
Code39ReadingRange 0x1 Enables Vesta algorithm decoding for better read range.
Code39CodeMark 0x2a A single character inserted before the barcode data to
indicate the symbology.
Code39CheckDigitVerification 0x0 Enables various check digit calculations, where 0 =
disabled, 1 = modulo 43, 2 = French CIP, 3 = Italian CPI, 4
= HIBC, and 5 = AIAG.
Code39ReadingTolerance 0x0 Tolerance for reading "hard to read" barcodes, where 0 =
high, 1 = medium, and 2 = low.
Code39BarCodeLengthL1 0x0 Length value L1. Range is 0x0 to 0xFF (0 to 255).
Code39BarCodeLengthL2 0x0 Length value L1. Range is 0x0 to 0xFF (0 to 255).
Code39BarCodeLengthL3 0x0 Length value L1. Range is 0x0 to 0xFF (0 to 255).
Code39BarCodeLengthMode 0x0 Length verification mode, where 0 = "L1 is min length", 1
= "L1, L2, L3 are fixed lengths", and 2 = "L1 is min, L2 is
max length".
Code39CheckDigitTransmission 0x0 Enable transmission of the check digit.
Code39StartStopTransmission 0x0 Enables transmission of start/stop characters.
Code39AcceptedStartCharacter 0x2 Selects start character, where 1 = '$', 2 = '*', and 3 = '$' and
'*'.
Code39FullASCIIConversion 0x0 Enables extended character set through the use of control
characters, where 0 = disabled and 1 = enabled (extended
spec).
Code39UDSI "B1" User-defined symbology identifier. Range is 0-4 characters.
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Code 128] - Code 128 Symbology Configuration
Code128Activation 0x1 Enables the standard Code 128 symbology.