Honeywell Vocollect, Справочник по аппаратуре

Страница: 45 / 316

| Talkman A700 | 45
Registry Key Default Value Description
PlesseyCodeMark 0x44 A single character inserted before the barcode data to
indicate the symbology.
PlesseyBarCodeLengthL1 0x0 Length value L1. Range is 0x0 to 0xFF (0 to 255).
PlesseyBarCodeLengthL2 0x0 Length value L2. Range is 0x0 to 0xFF (0 to 255).
PlesseyBarCodeLengthL3 0x0 Length value L3. Range is 0x0 to 0xFF (0 to 255).
PlesseyBarCodeLengthMode 0x0 Length verification mode, where 0 = "L1 is min length", 1
= "L1, L2, L3 are fixed lengths", and 2 = "L1 is min, L2 is
max length".
PlesseyCheckDigitTransmission 0x0 Enable transmission of the check digit.
PlesseyUDSI "C2" User-defined symbology identifier. Range is 0-4 characters.
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Standard 2 of 5] - Standard 2 of 5 Symbology Configuration
Standard2of5Activation 0x0 Enables the Standard 2 of 5 symbology.
Standard2of5CodeMark 0x44 A single character inserted before the barcode data to
indicate the symbology.
Standard2of5CheckDigitVerification 0x0 Enables modulo 10 calculation of check digits.
Standard2of5BarCodeLengthL1 0x6 Length value L1. Range is 0x0 to 0xFF (0 to 255).
Standard2of5BarCodeLengthL2 0x0 Length value L2. Range is 0x0 to 0xFF (0 to 255).
Standard2of5BarCodeLengthL3 0x0 Length value L3. Range is 0x0 to 0xFF (0 to 255).
Standard2of5BarCodeLengthMode 0x0 Length verification mode, where 0 = "L1 is min length", 1
= "L1, L2, L3 are fixed lengths", and 2 = "L1 is min, L2 is
max length".
Standard2of5CheckDigitTransmission 0x0 Enable transmission of the check digit.
Standard2of5Format 0x0 Specifies read mode, where 0 = Identicon (6 start/stop bars)
and 1 = Computer Identics (4 start/stop bars).
Standard2of5UDSI "B5" User-defined symbology identifier. Range is 0-4 characters.
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Telepen] - Telepen Symbology Configuration
TelepenActivation 0x0 Enables the Telepen symbology.
TelepenCodeMark 0x2a A single character inserted before the barcode data to
indicate the symbology.
TelepenBarCodeLengthL1 0x0 Length value L1. Range is 0x0 to 0xFF (0 to 255).
TelepenBarCodeLengthL2 0x0 Length value L2. Range is 0x0 to 0xFF (0 to 255).
TelepenBarCodeLengthL3 0x0 Length value L3. Range is 0x0 to 0xFF (0 to 255).
TelepenBarCodeLengthMode 0x0 Length verification mode, where 0 = "L1 is min length", 1
= "L1, L2, L3 are fixed lengths", and 2 = "L1 is min, L2 is
max length".
TelepenFormat 0x0 Sets output format, where 0 = ASCII and 1 = numeric.
TelepenUDSI "C6" User-defined symbology identifier. Range is 0-4 characters.
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Code 11] - Code 11 Symbology Configuration