Honeywell Vocollect, Справочник по аппаратуре

Страница: 191 / 316

| Honeywell Wireless Headsets | 191
Figure 141: Moving headset to storage position on a hard hat
Replacing an Earpad on the SRX2 Hard-Hat or High-Noise Headset
1. Remove the SRX2 electronics module from the earcup.
2. Pry the earcup apart by grasping the inside and outside sections of the earcup and pulling the two sections apart.
Figure 142: Separating earcup parts
3. Remove the worn foam earpad from the inside plate.
4.
Gently pull a new foam earpad around the plate.
Figure 143: Putting on the new earpad
5.
Align the inside posts of the two sections of the earcup.
6. Push sections together until they click into place.
Vocollect SRX2 High-Noise Headset
The Vocollect ® SRX2 High-Noise headset is an SRX2 headset with a single ear cup that fits entirely over the
operator's ear to allow him or her to hear voice instructions clearly in areas of high environmental noise. Combined
with the optimal speech recognition of the SRX2 headset using SoundSense, this model offers an effective wireless
solution for an industrial environment.