Honeywell Vocollect, Справочник по аппаратуре

Страница: 111 / 316

| Talkman T5 Series | 111
Figure 61: Removing a Device from a Charger
Inserting a Battery into a Talkman A500, T5-Series or T2-Series Device
Make sure the battery to be inserted is fully charged.
1.
Hold the Talkman so that the red and yellow ports are facing away from you.
2. Hold the battery with the pins facing away from you and so that the Vocollect logo is on top.
3.
Place the battery in at an angle, pins end first.
Figure 62: Properly Inserting a Battery
4. Push the back of the battery into place.
You will hear a click when the battery is in place.
CAUTION: Do not force the battery into the compartment. You may damage the battery or the device. If
the battery does not snap easily into place, reposition the battery in the compartment and try again.
Make sure the battery is firmly in place and can't be removed without pressing the battery release button.
Warning: Replace a battery only with another battery that has been authorized by Honeywell for the product
you are using. Use of an unqualified battery may present a risk of fire, explosion, leakage, or other hazard.
See also Honeywell Battery Safety
Removing a Battery from a Talkman A500, T5-Series or T2-Series Device
Make sure the Talkman device is off.
CAUTION:
Do not remove the battery until the LED indicator is off. If you remove the battery when the
device is on or sleeping, any data collected could be lost.
1.
Hold the device in one hand with the battery compartment facing toward you.