HNC Electric SV-E3 Series, Инструкция по эксплуатации

Страница: 63 / 178

63
response time [Setting range] 0 to 255
032.0r [Basic setting]
Pulse train
command
input mode
Select pulse signal type of pulse command input.
0= Pulse and direction: using pulse and direction input
1= Orthogonal phase difference: using orthogonal phase pulse (A-phase/B-phase)
input
2= CCW/CW: using positive pulse and negative pulse
[Initial value] 0 (Pulse/direction)
[Setting range] 0 to 2
Yes
032.1r [Basic setting]
Pulse train
command
Rotation direction
Select rotation direction of pulse command input
0: CCW addition counting
1: CCW subtraction counting
[Initial value] 1 (CCW addition counting)
[Setting range] 0 or 1
Yes
032.2r [Basic setting]
With(out) use of
automatic
command
interpolation for
division/
multiplication
When setting command division/ multiplication, the command will be processed by
smoothing interpolation automatically.
0= Disable
1= Enable
[Initial setting] 1 (Enable)
[Setting range] 0 or 1
Yes
032.3 [Basic setting]
Selection of Pulse
train input logic
Select the logic for pulse train input.
0= Positive logic : Up counting from Low to High
1= Negative logic: Downing counting from High to Low
[Initial setting] 0 (Positive logic)
[Setting range] 0 or 1
Yes
033.0r [Basic setting]
Pulse command
input filter
selection
The function of input filter is to reduce the fault caused by noise. Select the pulse width
of passing pulse command input.
0= No filter
1= Pulse width 25ns
2= Pulse width 50ns
3= Pulse width 100ns
4= Pulse width 150ns
5= Pulse width 200ns
6= Pulse width 300ns
7= Pulse width 400ns
8= Pulse width 600ns
9= Pulse width 800ns
10= Pulse width
1000ns
11= Pulse width 1200ns
12= Pulse width 1600ns
13= Pulse width 2000ns
14= Pulse width 2300ns
15= Pulse width 3100ns
Yes
When pulse command is open collector
circuit, it is recommended to set the best
filter. The following table indicates the
corresponding filter optimum value between
input pulse frequency and pulse duty ratio.
Select the best value according to input pulse
frequency and pulse duty ratio.