HNC Electric SV-E3 Series, Инструкция по эксплуатации

Страница: 171 / 178

171
400W SV-E3P040A2-A
750W SV-E3P075A2-A
1KW SV-E3P100A2-A
1.5KW SV-E3P150A2-A
2KW SV-E3P200A2-A
3. Setting
[3.1 Setting for absolute system]
■
Parameter setting is needed for absolute system of the drive.
■
Change the Selection of an encoder system (No.257.0) from 0 (initial setting, incremental system) to “1(absolute system).
This can be set by the set panel.
■
Refer to
「
5 Absolute encoder initialization
」
for the operation procedures.
[3.2 RS-485 communication setting]
Parameter setting must be done for the upper controller to get the absolute data of the drive by RS- 485 communication.
Change the Communication address (No.4.0) from “1(initial value) to the desired address No and the setting range is 1 to 32.
Change the Selection of host communication method(No.8.0) from “0(initial value” to “1(485 asynchronous serial
communication). The parameter change can be done by the set panel.
Refer to
「
5 Absolute encoder initialization
」
for the operation procedures.
Table Parameter setting
No. Parameter Description Whether to
restart the
24VDC power
4.0 Communication
address
Set the communication address of servo drive.
Set to “1” when not the multi-station communication. If using multi-station
communication, set different values for each axis.
[Initial value] 1
[Setting range] 1 to 32
Yes
8.0 Selection of host
communication
method
Select host communication mode.
0= Disable
1= RS-485 asynchronous serial communication
When connecting RS-485 signal cable and using RS-485 asynchronous
serial communication, select to “1”. If not, select to “0”.
When use USB, it is irrelevant to this setting and can communicate
anytime.
[Initial value] 0 (Disable)
[Setting range] 0 or 1
Yes
257. 0 Selection of an
encoder system
Select an option for Absolute system or Incremental system.
0 = Incremental system
1 = Absolute system
[Initial value] 0 (Incremental system)
[Setting range] 0 to 2
Yes
4 The installation of battery box cable(Optional)
[4.1 Installation of battery box cable]