5
motor and drive.
Fix the motor and have the test run away from the mechanical system.
After confirming the operation, the motor can be securely mounted to
mechanical system.
To prevent injury.
The servo motor must be installed in the specified direction.
To prevent injury or malfunction.
Install the equipment correctly in accordance with its weight and rated
output.
To prevent injury or malfunction.
Operation and running
Do not climb or stand on servo equipment. Do not put heavy objects on
equipment.
To prevent electric shock, injury, fault
or damage.
The parameter settings must not be changed excessively. Operation will
be instable.
To prevent injury.
When power is restored after an instantaneous power failure, keep away
from the machine because the machine may be restarted suddenly
(design the machine so that it is secured against hazard if restarted).
To prevent injury.
Keep it away from the direct sunlight.
To prevent malfunction.
Do not put strong impact on the motor, drive and motor shaft.
To prevent malfunction.
The electromagnetic brake on the servo motor is designed to hold the
servo motor shaft and should not be used for ordinary braking.
To prevent injury or malfunction.
Do not install or operate a faulty servo motor or drive.
To prevent injury, electric shock or fire
Check the power specification.
To prevent fault.
The electromagnetic brake may not hold the servo motor shaft. To ensure
safety, install a stopper on the machine side.
To prevent injury.
A sudden restart is made if an alarm is reset with the run signal on.
To prevent injury.
Connect the relay for emergency stop and for brake in series.
To prevent injury or malfunction.
Transportation and storage
Do not subject the equipment to the place with rain, waterdrop, poisonous
gases or liquids.
To prevent malfunction.
Do not carry the servo motor by the cables, shaft or encoder during
transportation.
To prevent injury or malfunction.
Do not drop or dump the motor during transportation and installation.
To prevent injury or malfunction.
Store the unit in a place in accordance with the instruction manual.
To prevent malfunction.
Other safety instructions
Please dispose the battery according to your local laws and regulations.
When disposing of the product, handle it as industrial waste.
Maintenance and inspection
Do not disassemble and/or repair the equipment on customer side.
To prevent malfunction.
Do not turn on or switch off the main power frequently.
To prevent malfunction.
Do not touch the servo drive heat sink, regenerative resistor, servo motor
etc. Their temperatures may be high while power is on or for some time
after power-off.
To prevent burns or electric shock.
When the drive become faulty, switch off the control circuit and main
power.
To prevent fire.
Содержание SV-E3 Series
