2-54
(3) Viscosity control data (INKVISCO.TXT)
[Example]
- No.1 to No.5
Plunger falling time No.1 to No. 5
- Average of falling time
Average of falling time (5 times)
- Temperature
Ink temperature measured by the sensor in the viscometer
- Standard
Standard ink viscosity at 100% ink concentration
- Viscosity
Ink viscosity (Average of falling time x Coefficient / Standard viscosity x100)
- Adjustment of viscosity (High-speed)
The “*” mark is indicated in the column during the adjustment of viscosity when the
position of initial level changed at the high-speed model.
- Control code & Control information
0: Normal
0: Normal (->Low) - Reducing concentration control due to the high ink concentration
0: Normal (High <-) - Increasing concentration control due to the low ink concentration
1: High Concentration - High ink concentration (120% < Ink viscosity)
2: Low Concentration - Low ink concentration (Ink viscosity < 80%)
3: Instability - Instability in the 5-times measurement of falling time.
(The difference between the maximum and minimum values of
falling time exceeded 10 % of average value.)
4: Out of range
- Initial level (High-speed machine)
The position of initial level at the high-speed machine (1 to 3) (0: At the other model)
№
Date
Time
№1
№2
№3
№4
№5
Average at
falling time Temperature Standard Viscosity
Adjustment
of viscosity
(High-
speed
Control
code
Control
info.
Initial level
(H
igh-
speed
machine)
1 2011/7/7
0:29:23 1.58 1.58 1.58 1.57 1.57
1.57
34
2.22
107
0 Normal
0
2 2011/7/7
1:02:58 1.61 1.61 1.61 1.61
1.6
1.6
35
2.205
109
0 Normal
0
3 2011/7/7
1:36:33 1.64 1.63 1.64 1.64 1.63
1.63
35
2.19
112
0 Normal(->Low)
0
4 2011/7/7
11:23:24 1.64 1.64 1.64 1.64 1.63
1.63
33
2.305
107
0 Normal
0
5 2011/7/7
11:56:59 1.71
1.7
1.7 1.69
1.7
1.7
32
2.326
110
0 Low Concentration
0
6 2011/7/7
12:30:37 1.67 1.67 1.67 1.67 1.66
1.66
34
2.26
111
0 Normal(->Low)
0
7 2011/7/7
22:12:09 1.53 1.53 1.54 1.53 1.53
1.53
35
2.21
104
0 Instability
0
8 2011/7/7
23:55:48 1.52 1.52 1.52 1.51 1.51
1.51
34
2.225
102
0 Normal(High<-)
0
Содержание IJ UX
