Hitachi IJ UX, Руководство по обслуживанию, Страница: 31 / 308

2-11
3 Select the setting values for print timing, print data and print phase.
Setting items for phase margin test
№
Item Setting
value
Contents
1
Print timing
Button
input
Prints each time Start printing is pressed.
Sensor Prints for each print sensor signal input.
2
Print data
For test
The printing conditions are automatically set as
described below.
Number of line
Dot matrix
Inter-character space
Character height
:
Character width
Ink drop use percentage
Product speed matching
The content of printing is as described below.
■■ A B C 1 2 3
Printed phase Printed phase which is set at present
Display
data Prints according to print conditions/contents currently
set for print target data.
3
Print phase
Automatic
update Prints print phases in sequence from 0 to 15 (f).
(Total of 16 prints per cycle)
Specified
phase
Print phase can be specified by pressing Increment /
Decrement.
4 Press Start.
The phase margin test in progress screen is then displayed.
Example of [Print timing: Button input]
[Ready ] Adjust./oper. checkout
<Phase margin test>
Start
printing
Abort
Proc. status: In progress
Print timing
Print data
Print phase
Printing starts at the press of [Start printing].
Print phase:
Ｘ
-phase (0-f)
Button input Sensor
For test Data to be displayed
Automatic update Specified phase
2015.07.07 12:45 Com=0
Start
printing
: one row
: 12
×
16 dots
: 1
: 99
: 5
: f/3
: none
(A phase determined to be most suitable)
(16 phases in total
from 0 to f)