Hitachi IJ UX, Руководство по обслуживанию

Страница: 73 / 308

2-53
●
Automatic ink & makeup replenishment sequence
Printing
(30 minutes)
Viscosity
measurement
Waiting for
defoaming
(10 minutes)
Ink
replenishment
(for dot count)
Makeup
replenishment
Ink
replenishment
(to initial level)
<Log timing>
(1) Except Pigment model: End of Step B1
(2) Pigment model: End of Step B2
●
Mode (Result of Automatic ink replenishment)
- Normal end
Mode = 1: Normal end at Step B1 or Step B2.
- The main tank ink level is higher than initial level when increasing or reducing
concentration control.
= 2: Normal end at Step C1.
- The main tank ink level becomes higher than initial level after ink
replenishment for dot count.
= 4: Normal end at Step C2
= 5: Normal end at Step C3
- Abnormal end or terminated
Mode = A: Abnormal end at step B1
= B: Terminated at step B1
= C: Abnormal end at step B2
= D: Terminated at step B2
= E: Abnormal end at step C1
= F: Terminated at step C1
= G: Abnormal end at step C2
= H: Terminated at step C2
= J: Abnormal end at step C3
= K: Terminated at step C3
(1) (2)
Step B1
Step B2 Step C1
Step C2
Step C3
Step B2 is for Pigment ink only.