Hitachi FSG Series, Технический каталог

Страница: 25 / 424

SYSTEM DESCRIPTION
1
/11
1.2.5 RPK - WALL TYPE
n
Elegant Design
With it’s elegant and timeless design, this unit will match
any decor. It’s compact size makes it easy to install even
in the smallest of rooms.
n
Quiet Operation
By utilizing a long centrifugal fan which has a small
diameter and smooth air flow patterns, operation sound
has been significantly reduced to 34dB-A (at Low
position). This model creates a pleasant, quiet and
comfortable environment.
n
Function,“Swing Louver”
The “Swing Louver” with three flaps (

&
‚
) at both
sides has been adopted, in order to provide comfortable
air to the entire room.
n
Wireless or Wired Control
The indoor unit is equipped with a wireless receiver kit
inside as a standard accessory. The wired remote
control switch, PC-P1HE is also applicable.
1.2.6 RPF - FLOOR TYPE
n
Slim Design of only 220 mm Depth
Due to the slim designs, the indoor unit can be installed
along the wall without wasting valuable floor space.
n
Low Height of only 630 mm
The height of the indoor unit is only 630 mm so that this
unit is ideal for the perimeter zone air conditioning
n
Optional Location for PC-P1HE (RPF)
In case of RPF Unit, it is possible to install the PC-P1HE
under the plastic cover as shown in the figure below:
1.2.7 RPFI - FLOOR CONCEALED TYPE
n
Compact Design
This unit is normally installed inside walls under windows,
without changing the interior. Due to its compact design,
620mm in height, 220mm in depth and 988mm in width,
the unit can be installed in a limited space in most
buildings.
n
Air discharge direction change
Air suction direction could be modified changing back
cover
¡
¢
¡
¢
Air flow guide
Air Outlet Flange
Up-Front Cover