Hitachi FSG Series, Технический каталог

Страница: 216 / 424

11
/14
REMOTE CONTROLLERS OPERATION
11.4.1. SETTING PRESENT DAY AND PRESENT TIME
(<Example> present Day: Friday, Present Time: 5:15 PM).
During the setting mode, the setting of the present time is not available when depressing the
"PRESENT" switch more than 3 seconds. $
ATTENTION
1. Supply power to the unit.
$
ATTENTION:
Supply power the unit more than 12 hours before unit operation for compressor
protection.
Do not cut off power during the term of using air conditioner.
The right figure shows the case of the present time at AM 0:00 on Sunday. (When the power
is turned ON, the present time is not set.).
2. Depress the "PRESENT" switch for more than 3 seconds.
The display is changed to the present time setting mode, and the "SET" indicator and the "
J
"
mark are flickered.
The right figure shows the case that ON time and OFF time are not set.
3. Set the "
J
" mark at the present day by depressing the "DAY" switch.
Depress the "OK" switch after setting the present day, the "
J
" mark is turned on and "hour"
indication is flickered.
The right figure shows the case of setting the day at "Friday".
4. Set "hour" indication at the present hour by depressing the "HOUR/MINUTE
}
or
~
"
switch.
Depress the "OK" switch after setting the present hour, "hour" indication is turned on and
"minute" indication is flickered.
The right figure shows the case of setting the hour at "PM 5".
Note: AM 12:00 is displayed as PM 00:00
5. Set "minute" indication at the present minute by depressing the "HOUR/MINUTE
}
or
~
" switch.
Depress the "OK" switch after setting the present minute, the present day and the present
time are fixed, and the present time setting mode is changed to the monitor mode. "minute"
indication is turned on and the "SET" indication is turned off.
The right figure shows the case of setting the minute at "15".
11.4.2. CHANGING WEEKLY SCHEDULE PATTERN (A OR B)
There are 2 (two) patterns (A or B) set for the weekly schedule.
Each pattern can be set with 3 (three) times ON/OFF settings for each weekly day.
<Function>
To select the pattern for setting and operating the schedule.
The schedule of A or B pattern can be set for each week and changed for a season.
1. Depress the "SET/MONITOR" switch.
The control timer is changed to the setting mode and the "SET" indication is turned on.
2. Depress the "A/B" switch.
The set pattern is changed ("A" to "B") by depressing the "A/B" switch.
The right figure shows the case of selecting the set pattern "B".
3. Depress the "SET/MONITOR" switch.
The "SET" mode is turned off and the setting mode is changed to the monitor mode.