manualshive.com logo in svg

Hitachi FSG Series, Технический каталог

Поделиться
Скачать
Hitachi FSG Series Скачать руководство пользователя страница 243

UNITS INSTALLATION

12

/13

?

  

NOTE:

Tighten the nuts of the sling bolts or anchor bolts with
the suspension brackets after the adjustment is
completed. Apply Lock-Tight paint to the bolts and
nuts in order to prevent them from loosening.

n

 

Mounting of Indoor Unit.

-

Remove side covers of the unit

-

To avoid damage to the resin side covers, before lifting or
moving the indoor unit, remove the resin side covers as
indicated in the following procedure.

1. Slide the resin side covers forward approximately

15mm.

2. Carefully pull the bottom of the side covers away from

the indoor unit approximately 10mm.

3. Remove the resin side covers upward.

&

 

CAUTION:

The mechanism of the automatic swing louver is
utilized.  Do not move the swing louver by hand or
other objects.  This can damage the mechanism of the
automatic swing louver.

■

 

For Hanging Type Installation.

-

Hook the indoor units on the suspension brackets, by
setting the mounting bolts on the units with the notches of
the bracket, as shown below. Fix the units with the nuts,
flat washers and spring washers. (Each four nuts and
washers are supplied.)

■

 

For Semi-Concealed Installation.

-

Open a hole in the false ceiling.

-

When installing the indoor unit as shown in the following
figure, insulate the top part of the cabinet which will be
concealed in the ceiling because dew may occur under
cooling operation.

-

Secure the indoor unit with the suspension bolts.
Position the false ceiling panels along the indoor unit.

Models

A

RPC-2.0

1560

RPC-(2.5/3.0/4.0)

1780

RPC-5.0

2040

Models

A

RPC-(2.0/2.5/3.0)

13

RPC-(4.0/5.0)

75

Sling Bolt (M10)
(Field-Supplied)

Suspension
Bracket

Nuts and Washers
(Field-Supplied)

Indoor unit
Front side

Indoor unit
rear side

Top Side of Unit

Air Inlet Grille

Hooking Part

Do not hold
this louver

Fixing Screw

Connector

M4 Screw

Fix the unit with
four M8 nuts.

³

 300

³

 50

³

 300

³³³³

 A

³

 8

³

 605

(mm)

Insulation Material
(Field-Supplied)

A

Attach False Ceiling to Seal Space

Hole

Содержание FSG Series









































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды