27
_____________________________________________________________________________________________
3.1 Basic Operation
______________________________________________________________________________________________
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
2. Exiting Menu Options
While setting a menu option, press one of the MENU
keys to exit the current menu screen.
3.Selecting and Confirming Menu Options
Settings are made on each screen using the
CURSOR
key.
The item selected with the cursor is shown against a yellow
background. After selecting an item, press the
ENTER
key
to move the cursor to the submenu. Select an option from
the submenu, then press the
ENTER
key to confirm.
4. Saving Screens
With a PC card inserted, hold down the
FILE
key for at
least two seconds to save the current screen in bitmap
(BMP) format. This operation is not available during
measurement. File name is "CPhhmmss.BMP". "hhmmss"
are the six digits of the hour, minute and second when the
file is saved.
5. System Reset
To reset the 8730-10, 8731-10 in case of problems, turn
off the power, then turn it on again while holding down
the
STOP
key. This will reset all settings except those for
communications (LAN and RS232C), test mode
(MODE01 to 16), and comparison area (A01 to A16).
(See 7.2.8.)
6. Full Reset
To restore the 8730-10, 8731-10's default settings in case
of problems, turn off the power, then turn it on again while
simultaneously holding down both the
STOP
key and
START
key. This will reset all settings, including those for
communications (LAN and RS232C), measurement
conditions, and area data stored in internal memory.
7. Key Lock
The key lock function disables key operations on the front
panel. This function is used to prevent unintended
changes in settings during measurement. To lock or
unlock, press the right and left
CURSOR
keys simultaneously.
