169
_____________________________________________________________________________________________
7.2 Setting / Check
______________________________________________________________________________________________
7.2.5 Start Backup
Setting Screen:
SET
Start Backup (ON, OFF)
NOTE
When the "
Start Backup
" function is "
ON
" and power is turned off during
recording (with the LED above the
START
key on), then turned back on
again, the 8730-10, 8731-10 will restart recording immediately.
When a trigger is used, the 8730-10, 8731-10 will enter the trigger
standby state. This function is not effective, however, for the timer trigger.
Procedure
1. Press the
ADJUST/SYSTEM
key to
display the Adjustment screen.
2
.
Use the
CURSOR
key to select "
SET
" on
"
Page
".
3. Use the
CURSOR
key to select "
Start
Backup
" on the display menu.
4. Press the
ENTER
key, and use the right
and left
CURSOR
keys to select "
ON
" or
"
OFF
", then press the
ENTER
key.
OFF: Does not use the start backup
function.
ON : Uses the start backup function.
Underlined characters in yellow indicate the currently selected status.
