82
_____________________________________________________________________________________________
4.4 Trigger Functions
______________________________________________________________________________________________
T
A
200mV
0V
T
B
-600mV
0V
A: Trigger Level 200 mV, Trigger Slope UP
B: Trigger Level -600 mV, Trigger Slope DOWN
Setting the Trigger Slope
3. Set the slope condition under "
Slope
" as
follows:
UP : Activates a trigger at the rise of a
waveform.
DOWN: Activates a trigger at the fall of a
waveform.
(Examples for Setting)
To activate a trigger at points A and B of a sine wave as shown in the figure
below, set the conditions as follows:
Setting the Trigger Filter
4. Set the trigger filter under "
Filter
".
OFF : Does not use a trigger
filter.
0.1 to 10.0 DIV: Uses a trigger filter with
the width of the set
number of DIV.
