117
_____________________________________________________________________________________________
5.3 Creating Comparison Area
______________________________________________________________________________________________
"
RECT
"
"
RECT
"
<<Related Issues>>
In step 3 above, pressing the
STOP
key after
setting the start point cancels the task of
drawing a line. Pressing the
STOP
key again
exits the "ERCTANGLE" command.
Press the
CURSOR SCROLL
key to make the
+ cursor move fast (1 DIV each movement).
Pressing the
CURSOR SCROLL
key once
again switches modes to low-speed motion (dot-
by-dot movement).
8-2. RECT
: Draw a rectangle and do not fill it in.
Draws a rectangle that has a line from two specified points at diagonal
corners. The rectangle will not be filled in.
8-3. RECT
: Draw a rectangle and fill it in.
Draws a rectangle with diagonal line specified by two points. The
rectangle will be filled in.
Drawing Procedure
1. Use the
CURSOR
key to select "
DRAWING
"
command, then press the
ENTER
key. The
DRAWING command menu then appears.
Select the "RECTANGLE" command, then
press the
ENTER
key.
RECT
: Does not fill in the rectangle.
RECT
: Automatically fills in the
rectangle.
2. The + cursor and the X-Y coordinates will
appear on the screen.
3. Use the
CURSOR
key to move the + cursor
for specifying the start point, then press the
ENTER
key to confirm the start point.
4. Specify the end point. Use the
CURSOR
key
to move the + cursor. A rectangle with
diagonal line specified by the start point and
+ cursor is then drawn using a red line.
(The rectangle is not yet confirmed.)
5. Press the
ENTER
key to confirm the
rectangle and change the line to green.
Selecting "
RECT
" fills in the rectangle.
6. To exit the command, press the
STOP
key.
7. To exit the DRAWING menu, select "
EXIT
"
and press the
ENTER
key. The editor
command menu then appears.
