258
_____________________________________________________________________________________________
13.5 Waveform Viewer (Wv)
______________________________________________________________________________________________
CH
This indicate the list of channel.
When a check mark is present the
corresponding channel is displayed.
Zoom
Set the magnification on the voltage axis for
the specified channel.
Posn
Set the position of the specified channel.
Show
Display the specified channel(s).
Hide
Do not display the specified channel(s).
Show All
Display all channels.
Hide All
Do not display all channels.
Color
Change the color of the specified channel(s).
Default
Set all values of the specified channel(s) to
their default values.
Close
Close the Waveform Control Panel.
Changing waveform scale and position (Waveform Control Panel)
You can adjust the display for each channel separately. In the [
View
] menu,
select [
Wave Control Panel
] to display a dialog box.
Checking the waveform measurement conditions (Properties)
Select [
View
], then [
Properties
] from the menu to display the measurement
settings on the MEMORY HiCORDER.
Checking voltage values (Trace)
Select [
View
], then [
Trace
] from the menu to check the time value and
difference of the two cursors (A and B) and the voltage values and
differences of all channels.
File list in index file
Select [
View
], then [
Block List
] to check the file list (block number, file
name, time axis range, trigger time) in the index file.
Double-click a file in the list opens a new window in which you can check
waveform in that file.
* This is effective only when reading Sequential, Multi-block, REC&MEM
index files.
