Hioki 3155-01, Инструкция по эксплуатации

Страница: 60 / 366

40
────────────────────────────────────────────────────
5.2 Screens (ME Equipment)
────────────────────────────────────────────────────
5.2.5 Flow of Screens for Basic Operations (for ME Equipment)
Measuring mode screen
Polarity and equipment condition
set-up window
Print-out window
Initial screen Equipment set-up screen
Select and press the keys for the power
source polarity and equipment to be
measured to set.
Measurement continues even while the
window is open.
For automatic measurement, refer to
Section 5.10.3," Automatic Measurement
Setting."
For a detailed set-up procedure, refer to Section
5.10.5, "Printing out the Maximum Values."
For saving, refer to Section 5.10.6, "Saving the
Maximum Values ."
Measurement starts automatically.
Set the grounding class and applied
part type of the equipment to be
measured, and register the model
name and number.
After printing
NOTE
・ Change of screens during basic operation is as follows.
・ On the measuring mode screen, measured values can be checked in real
time.
Example: When performing enclosure leakage current measurement
Setting conditions for each measuring mode is saved with each measuring
mode. However, the model name and number are held in common. Changing
the measuring mode will clear the maximum and current values.