Hioki 3155-01, Инструкция по эксплуатации

Страница: 228 / 366

208
────────────────────────────────────────────────────
7.6 Condition Set-up Window Setting (Universal)
────────────────────────────────────────────────────
7.6.2 Allowable Value Setting (For Low Resistance
Measurement)
Screen during input
(Numerals are displayed in the input cell.)
Set value = numeral × coefficient
Range: 10 m
Ω
to 500
Ω
NOTE
Low resistance measurement is performed only for grounding class
equipment. The allowable value setting may be revised as necessary.
When shipped, 100 m
Ω is set.
Settings
(1) On the measuring mode screen, press the key to open the
allowable value set-up window.
Current setting
Input numeral
Input coefficient
Keys for numerical input
Numerals: Press to input numerals
Coefficient: Press to input coefficient
Units: Highlighted in white during numerical input. Press after numerical
input to finalize units.
Return: Press to close the allowable value set-up window.
If a value of less than 10 m Ω is input, the value is automatically revised to
10 m
Ω
. If a value of more than 500
Ω
is input, the value is automatically
revised to 500 Ω .
(2) Using the numerical keys, input the desired value. (After pressing the
numerals key) Press the key to clear mistakes.
(3) After the numeric value is input correctly, press either unit key to finalize
the input. If the screen is changed before the unit is finalized, the setting
is not revised. The unit keys are inoperative until a numeral has been
input.
(4) After making the setting, press the key to close the allowable value
set-up window.
(5) The allowable value judgment can be turned ON or OFF on the allowable
value judgment set-up screen of the system screen. If set to OFF, the
allowable values are not displayed on the measuring mode screen.