Hioki 3155-01, Инструкция по эксплуатации

Страница: 55 / 366

35
────────────────────────────────────────────────────
5.2 Screens (ME Equipment)
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
5.2.1 Initial Screen (ME Equipment)
5.2.2 Equipment Set-up Screen (ME Equipment)
NOTE
NOTE
When the power is first turned on, the basic screen for
controlling the 3155 immediately appears, called the
initial screen.
Equipment set-up
: The grounding class and applied part
type of the equipment to be measured
Measuring mode
: Earth leakage current, enclosure
leakage current, patient leakage
current
, patient leakage current
,patient leakage current ,
patientauxiliary current, low resistance
measurement
System
: Clock, beeper, RS-232C communications etc.
On the initial screen, press
the key to open the
equipment set-up screen.
On the equipment set-up screen, settings for the
grounding class and applied part type of the equipment to
be measured, and registration of the model name and
number can be made.
Press the key to return to the initial screen.
Grounding class setting
: Class equipment
: Class equipment
: Internally powered equipment
If changing the setting for the grounding class of the equipment to be
measured, the condition settings on each measuring mode screen are
initialized, except for the coefficient of the allowable value.
Applied part type setting
: Type B applied part
: Type BF applied part
: Type CF applied part
If changing the setting for the applied part type of the equipment to be
measured, the allowable value on each measuring mode screen is initialized.
For details, refer to Section 5.10.1, "Allowable Value Setting (For Leakage
Current Measurement)," and Section 5.10.2, "Allowable Value Setting (For
Low Resistance Measurement)."