Hioki 3155-01 Скачать руководство пользователя страница 245 | Manualshive

Страница: 245 / 366

Hioki 3155-01 Скачать руководство пользователя страница 245

225

────────────────────────────────────────────────────

7.7 System Screen (Universal)

────────────────────────────────────────────────────

7.7.4 Allowable Value Judgment Set-up Screen

NOTE

7.7.5 Beep Sound Set-up Screen

Setting the allowable value judgment (comparison with the
maximum value and current value)

: Perform the allowable value judgment. If the

maximum value and current value are less than or

equal to the allowable value, PASS is displayed, if

higher than the allowable value, FAIL. Also, the

allowable value beep sound setting becomes effective.

: Do not perform the allowable value judgment.

The allowable values are not shown on the

measuring mode screen.

Setting the beep sound for the allowable value judgment

: If the allowable value judgment for the maximum

value is FAIL, the beep sound is emitted.

: The beep sound is not emitted for the allowable value

judgment.

: Return to the system screen.

If the

key is pressed, the beep sound

stops.

Turn the beeper on or off.

: Turn the beeper on

: Turn the beeper off

If the beep sound has been set to ON, it will be emitted under
the following conditions, and the beep sound setting for the
allowable value judgment become effective as well.
The beep sound is emitted when:

・

The power is turned on.

・

A key is pressed.

・

Making a measurement in the automatic measurement mode.

・

An input of 25 mA or more is detected in the leakage current
measurement mode.

The beep sound is emitted irrespective of the beep sound setting
when:
An error has occurred in the RS-232C system.

«
...
243
244
245
246
247
...
»

Содержание 3155-01















































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды