Hioki 3155-01, Инструкция по эксплуатации

Страница: 155 / 366

135
────────────────────────────────────────────────────
6.3 Enclosure Leakage Current Measurement Mode (for IEC/TR 60990)
────────────────────────────────────────────────────
6.3.6 Basic Settings for Enclosure Leakage Current
Measurement (for IEC/TR 60990)
Polarity and equipment status
set-up window
Initial screen
Equipment set-up screen
Measurement starts
automatically.
Measurement network filter set-up
window
Measurement current set-up window
Enclosure leakage current
measurement mode screen
Allowable value set-up window
Set the allowable value referring
to Section 6.6.1, "Allowable Value
Setting."
For enabling or disabling the
allowable value judgment, refer to
Section 6.7.4, "Allowable Value
Judgment Set-up Screen."
Set the grounding class of the equipment
to be measured, and register the model
name and number.
Select and press the keys for the power source
polarity and equipment to bemeasured to set.
Measurement continues even while the window
is open.
For automatic measurement, refer to Section
6.6.3, "Automatic Measurement Setting."
Set the filter.
Set the measurement current.
Contact condition set-up window
Set the contact condition.
This illustrates basic settings and reference categories until measurement.
Preparations for measurement follow Section 6.3.2, "Connecting Equipment for
Enclosure Leakage Current Measurement", and 6.3.5, "Connecting Equipment
for Measurement Accompanying IEC 1010-1 ’90 Amendment 2 ’95."