11. If the fan cage was removed, do the following:
a. Make sure that all the system cables that are routed through the front cable channel are properly secured in the
metal cable tabs. This is done to prevent system damage due to cables being inadvertently caught under the fan
cage.
14. Do one of the following:
Position the tower server for operation.
• Server in rack mode:
Slide the server into the rack.
15. Connect all peripheral cables to the server.
16. Connect each power cord to the server.
17. Connect each power cord to the power source.
The installation is complete.
After installing the DIMMs, use the
System Utilities > System Configuration > BIOS/Platform Configuration (RBSU) >
Memory Options to configure the memory settings.
122
Hardware options installation
Содержание ProLiant ML350 Gen10
