manualshive.com logo in svg

Hewlett Packard Enterprise ProLiant ML350 Gen10, Руководство пользователя

Сервер Hewlett Packard Enterprise ProLiant ML350 Gen10 - надежное и мощное решение для вашего бизнеса. У нас вы можете скачать бесплатно Руководство пользователя на manualshive.com. Получите подробное руководство по установке, настройке и обслуживанию этого устройства, чтобы повысить эффективность работы вашей компании.

Поделиться
Скачать
background image

SUM identifies associated nodes you can update at the same time to avoid interdependency issues.

Key features of SUM include:

• Discovery engine that finds installed versions of hardware, firmware, and software on nodes.

• SUM deploys updates in the correct order and ensures that all dependencies are met before deploying an update.

• Interdependency checking.

• Automatic and step-by-step Localhost Guided Update process.

• Web browser-based user interface.

• Ability to create custom baselines and ISOs.

• Support for iLO Repository (Gen10 or later iLO 5 nodes only).

• Simultaneous firmware and software deployment for multiple remote nodes.

• Local offline firmware deployments with SPP deliverables.

• Extensive logging in all modes.

NOTE: SUM does not support third-party controllers, including flashing hard drives behind the controllers.

Integrated Smart Update Tools

Integrated Smart Update Tools (iSUT) is the smart update solution for performing online firmware and driver updates.
iSUT is used with iLO 4, iLO 5, and with update solutions (management appliances such as iLO Amplifier Pack or HPE
OneView and Smart Update Manager (SUM) to stage, install, and activate firmware and driver updates.

The solution must be installed on the operating system, where it updates results through Rich Infrastructure Services
(RIS) communication.

•

iSUT: Polls iLO to check for requests from SUM or iLO Amplifier Pack for updates through the management network
and orchestrates staging, deploying, and activating updates. You can adjust the polling interval by issuing the
appropriate command-line option provided by iSUT. Performs inventory on target servers, stages deployment, deploys
updates, and then reboots the servers.

•

iLO 5 with integrated Smart Update (Gen10 or later servers only): Performs iLO Repository-based updates by
downloading the components from iLO Repository when iLO Installation Queue has the components which can be
updated by iSUT.

•

iLO Amplifier Pack and HPE OneView: Displays available updates for servers. Communicates with iSUT (or SUT 1.x)
to initiate updates using the iLO Redfish interface. iSUT reports the status of updates to iLO Amplifier Pack through
iLO Restful Interface.

•

SUM: A tool for firmware and driver maintenance for HPE ProLiant servers and associated options.

NOTE: SUM and iLO Amplifier Pack should not manage the same nodes.

Updating firmware from the System Utilities

Use the 

Firmware Updates option to update firmware components in the system, including the system BIOS, NICs, and

storage cards.

190

Software and configuration utilities

Содержание ProLiant ML350 Gen10























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ProLiant ML350 Gen10

LaCie Network Space MAX Datasheet preview
Network Space MAX
Бренд: LaCie Страницы: 2
Advantech EKI-152X series User Manual preview
EKI-152X series
Бренд: Advantech Страницы: 94
NMS Communications Vision VS 5000 Installing preview
Vision VS 5000
Бренд: NMS Communications Страницы: 22
PRG MBOX 2016 Hardware Manual preview
MBOX 2016
Бренд: PRG Страницы: 50
HPE StoreOnce 6500 User Manual preview
StoreOnce 6500
Бренд: HPE Страницы: 258
LG PCS400R Pro:Centric Installation & Setup Manual preview
PCS400R Pro:Centric
Бренд: LG Страницы: 57
LG 24CN650I Owner'S Manual preview
24CN650I
Бренд: LG Страницы: 104
LG Pro:Centric PCS200S Installation & Setup Manual Warranty preview
Pro:Centric PCS200S
Бренд: LG Страницы: 40
LG CK500W Owner'S Manual preview
CK500W
Бренд: LG Страницы: 6
LG PCS500R Pro:Centric Installation & Setup Manual Warranty preview
PCS500R Pro:Centric
Бренд: LG Страницы: 70
LG 34CN650N Manual preview
34CN650N
Бренд: LG Страницы: 24
LG Centric PCS150R Pro Installation & Setup Manual preview
Centric PCS150R Pro
Бренд: LG Страницы: 35
LG Centric PCS200R Pro Installation & Setup, Quick Reference, Warranty preview
Centric PCS200R Pro
Бренд: LG Страницы: 384
Iomega StorCenter Pro NAS 200rL Product Release Information preview
StorCenter Pro NAS 200rL
Бренд: Iomega Страницы: 2
Biamp VOCIA TTS-1 Operation Manual preview
VOCIA TTS-1
Бренд: Biamp Страницы: 11
Alfresco JLAN Installation Manual preview
JLAN
Бренд: Alfresco Страницы: 49
Super Superserver 5038ML-H24TRF User Manual preview
Superserver 5038ML-H24TRF
Бренд: Super Страницы: 108
QUANTA STRATOS S210 Series S210-X12MS Technical Manual preview
STRATOS S210 Series S210-X12MS
Бренд: QUANTA Страницы: 223

Бренды по названию

Популярные бренды

Загрузить еще бренды